Sponsored by Philips Healthcare
November 7-9, 2012
Wyndham Hotel-Boston
Andover, Massachusetts
This event provides working knowledge that you need for implementation of lead-free electronics manufacturing processes in the medical sector.
The July 2014 deadline for regulatory compliance applies only in Europe at this time, but it is a wake-up call for all organizations in the medical sector with global sourcing and distribution.
WEDNESDAY, NOVEMBER 7, 2012
WORKSHOP 9:00 am to 3:30 pm
Challenges of Conversion: From Leaded to Lead-Free Operation
Instructors:
Leo Lambert, Vice President – EPTAC Corporation
Umut Tosun, CTO – ZESTRON America
This course presents the challenges of converting to lead-free from a leaded operation.
Process awareness issues based upon the conversion will be covered, with specification changes implemented with introduction of new alloys
What You Will Learn
Your Instructors
As technical director for EPTAC Corporation, with special expertise in metallurgy and soldering, Leo Lambert oversees content of course offerings and provides expert consultation: he develops, troubleshoots, and audits manufacturing processes. Co-author and Master Instructor for one of the most widely-utilized industry training programs (IPC A-600 for Acceptability of Printed Boards) Leo has over 30 years of experience in electronics quality and acceptance criteria.
Umut Tosun is the application technology manager at ZESTRON America. He has published in leading electronics manufacturing publications and presented technical papers and studies at international conferences. He holds a Bachelor of Science degree and master’s degree in chemical engineering from the Technical University of Hamburg, Germany.
TOUR 3:30-5:00pm Customer Visit Center at the Philips Healthcare offices
THURSDAY, NOVEMBER 8, 2012
Technical Conference
Agenda
7:30 am Check-in and Continental Breakfast
8:00 am Welcome and Introductions
Dr. Po Tse, Sr. Reliability Risks Manager – Philips Healthcare
8:15 am Keynote: Reliability Priorities for Lead-Free
Dr. Peter van der Heide, Sr. Director of Product Creation Process – Philips Healthcare
9:00 am Tin Whiskers: Detection, Formation, Mitigation
Bob Landman, Technologist – H&L Instruments
9:45 am PERM (Pb-free Electronics Risks Management) Status Report
Anthony Rafanelli, Ph.D, P.E., Engineering Fellow – Raytheon
10:30 am BREAK
10:45 am Past, Present and Future Lead Free Projects within HDPUG
Marshall Andrews, Executive director – HDPUG (High Density Packaging User Group)
11:30 am Roles and Responsibilities within Medical Electronics Manufacturing Organizations
Mulugeta Abtew, Senior Manager – Sanmina-SCI
12:15 pm LUNCHEON
1:15 pm Lead-Free PCB Testing : Experiences in the Medical Sector
Raj Kumar, Vice President of PCB Technology – Viasystems
2:00 pm Simulation-Based Reliability Assessment of RoHS compliant Electronic Equipment
Michael Osterman, Ph.D., Research Associate – CALCE, University of Maryland
2:45 pm BREAK
3:00 pm Sherlock II Prediction Model for Reliability
Craig Hillman, Ph.D., CEO and Managing Partner – DfR Solutions
3:45 pm Lead-free PCB Cleanliness Requirements
Dr. Mike Bixenman, CTO – Kyzen Corporation
4:45 pm Concluding Remarks
5:00-6:30pm NETWORKING RECEPTION at the Wyndham Hotel – for all event participants
FRIDAY, NOVEMBER 9, 2012
Technical Conference (continued)
Agenda
7:30 am Check-in and Continental Breakfast
8:00 am Benefit, Risk, and the FDA
Keynote: Elisabeth George, Vice President Global Regulations & Standards – Philips Healthcare and Peter Tortorici, Ph.D., New Product Development Manager – Medtronic
10:00 am BREAK
10:15 am Optimal Choices for Lead-Free Soldering Materials
Carl Seelig, AIM Solder
11:00 am Supply Chain: Lead-Free Quality Concerns and Expectations
Ravi Nabar, Ph.D, Sr. Director of Supplier Quality – Philips Healthcare
11:45 am Concluding Remarks
12:00 am ADJOURN
Special Contributors
Guide to the RoHS2 EN 50581 Standard, distributed on-site and at www.bomcheck.net/rohs
European Coordination Committee of the Radiological, Electromedical, and Healthcare IT Industry – Sustainable Competence in Advancing Healthcare
National Electrical Mfg Assoc, Business Information Services/Medical Imaging & Technology Alliance
Questions?
Contact the IPC Manager of Professional Development at AnneMarieMulvihill@ipc.org or +1 847-597-2827
Registration:
Hotel:
Wyndham Boston Andover
123 Old River Road
Andover, MA 01810
To make reservations: call +1 978-975-3600 and state that you are with IPC to receive the discounted rate of $99/night. Special rate is available until all discounted rooms are booked – or until Friday, October 19, 2012.
EPTAC is an internationally recognized leader in solder training and IPC certification, providing professionals with the skills to accelerate their careers and businesses and the talent to succeed. For over 35 years, EPTAC has been helping corporations increase quality standards, improve productivity, and maximize profits.
With 24 locations in North America, EPTAC continues to expand its offerings and exceptional instructional staff to provide easy access to knowledge and skill-based programs when and where the industry demands it. Access our scheduled programs through our website or schedule your own corporate on-site training. For more information, call 800.643.7822 or contact us.